Low Voltage Panels
POWER CONTROL CENTER (PCC)
Mega Electrical is one of the best LV Power Control Center (PCC) panel manufacturers & suppliers in India. All our panels fully comply with all regulatory requirements and are fully tested. Every panel is custom designed and built to customer specifications.
Applications
- Transformer Distribution
- D.G. Distribution
- Sub-distribution for the above
Features
The PCC (Power Control Center) & DB (Distribution Board) Panels are constructed for the distribution and sub-distribution of the power equally to it’s final usage point. Essential care is taken for the minimum protection to be considered so that minimum fault does not effect or change the end equipment. The Busbar compartment, where the main horizontal and vertical busbar are located. The Equipment compartment, And the Cable compartment, where the termination is located which is designed for fast and comfortable cabling.
General Specifications
- Fixed / Modular design
- Busbar rating upto -6300A
- BUSBAR SUPPORT SMC / DMC
- BUSBAR Aluminium / Copper, Electrolytic grade
- Panel confirm to IS Standards
- The enclosure is completely assembled in CRCA SHEET 14 SWG (2 mm) Panel Structure and 16 SWG (1.6 mm ) Doors/Cover and 10 swg (3 mm) gland plate
- Cable room can be installed as many as a single core cables
- Inner panel structure build from angle support
- Base frame build from channel base of 100 mm only
- ENTRY Top or Bottom
Unique Specifications and Advantages
- Totally customised product
- High mechanical strength and ensured coated with pure poly urethane.
- Highest quality standards for every material used in the panel.
- Strictly follow ISO 9001-2008
- Make of the switchgear as per customer choice
- Compartmentalised/ Conn-Compartmentlised panel.
- They will be installed indoors/ outdoor - as required
- All doors will be suitably labelled and marked for convenience of operation & maintenance
- Power Control Centre is used for distribution and control of various power source used in industry.
- Normally Power Control Centres is installed near power source hence fault level is high.
- It is designed to suit fault level of 50KA or 65 KA for 1 sec.
- Busbar system in Power Control Centres are designed to suit the fault level as well as temperature rise to 40°C above ambient.
- Ample space is provided for cable termination.
- Various protections viz. short circuit, overload, earth fault, under voltage etc are provided to protect source and equipment.
Technical Parameters and Data
| Rated Voltage: | 415 ± 5% volt, 3 phase (4 W + E) |
| Rated Current: | 400A,2000A,3000A,6300A |
| Rated Insulated Voltage: | 690V |
| Rated Frequency: | 50 Hz AC Supply |
| Rated Short-Time Withstand Current : | 80 Ka |
| Initial peak Rated Short-Time Withstand Current : | 220KA |
| Duration of Short Circuit: | 1 second |
| Protection grade of the enclosure : | IP54 standard and optional upto IP66 |
| Forms used for internal separation: | upto Form 4b |
| Temperature rise tested enclosure: | An ambient temperature of 50°C |
| Standard colour for Panel: | RAL 7032 Siemens Grey (Please contact us for any other colour) Nine Tank and Oven & Spray based Paint Process |